(1) Check the quantity when dragging the material, and pay attention to avoid defects.
(2) Different batches of dyed or sand-washed fabrics should be cut in batches to prevent chromatic aberration on the same piece of clothing. For a piece of fabric with a chromatic aberration phenomenon, it is necessary to carry out a chromatic aberration layout.
(3) Pay attention to whether the silk strands of the fabric are straight and the direction of the silk threads of the garment parts meet the process requirements during the layout. For the pile fabrics (such as velvet, velvet, corduroy, etc.), the layout should not be reversed, otherwise, it will affect the color of the clothing. The depth.
(4) For striped fabrics, when towing materials, attention should be paid to the alignment and positioning of the strips in each layer to ensure the continuity and symmetry of the strips on the garment.
(5) Cutting requires accurate cutting and smooth lines. The paving type should not be too thick, and the upper and lower layers of the fabric are not biased.
(6) Cut the knife-edge according to the registration mark of the template.
(7) Be careful not to affect the appearance of the finished garment when using the taper hole mark for customized T-shirts. After cutting, count the number and inspect the pieces, and bundle them according to the clothing specifications, and attach a ticket to indicate the model number, location, specifications, etc.
